>NAME
>VALUE
>NAME
>VALUE
<b>PIN HEADER</b>
>NAME
>VALUE
>NAME
>VALUE
>Name
>Value
2-Pin JST PH Series Right-Angle Connector (+/- for batteries)
>Name
>Value
<b>Source: http://www.intersil.com/data/fn/fn7833.pdf</b>
>NAME
>VALUE
>NAME
>VALUE
<p>Bourns 3303W 3MM SMT Trimpot</p>
>NAME
>VALUE
>NAME
>VALUE
1
<b>SOD-123</b>
<p>Source: http://www.diodes.com/datasheets/ds30139.pdf</p>
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
<b>Revision Level Field</b> - 40 mil<p>
Set version with global board attribute '>REV'
>REV
<b>Single and Dual Gates Family, US symbols</b><p>
Little logic devices from Texas Instruments<br>
TinyLogic(R) from FAIRCHILD Semiconductor TM
<p>
<author>Created by evgeni@eniks.com</author><br>
<author>Extended by librarian@cadsoft.de</author>
<b>Small Outline Transistor</b><p>
SOT753 - Philips Semiconductors<br>
Source: http://www.semiconductors.philips.com/acrobat_download/datasheets/74HC_HCT1G66_3.pdf
>NAME
>VALUE
Small Outline Transistor
SOT753 - Philips Semiconductors
Source: http://www.semiconductors.philips.com/acrobat_download/datasheets/74HC_HCT1G66_3.pdf
<b>EAGLE Design Rules</b>
<p>
Die Standard-Design-Rules sind so gewählt, dass sie für
die meisten Anwendungen passen. Sollte ihre Platine
besondere Anforderungen haben, treffen Sie die erforderlichen
Einstellungen hier und speichern die Design Rules unter
einem neuen Namen ab.
<b>Adafruit board design rules</b>
<p>
<ul>
<li>Smallest drill: 16mm</li>
<li>Min trace: 10mil</li>
<li>Min spacing: 8mil</li>
<li>Dimension spacing: 10mil</li>
<li>Tenting for vias</li>
<li>Angle check on</li>
</ul>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.